What is Clipping Mastering Converter

Clipping Mastering is a digital audio processing technique used to improve the quality of digital audio recordings.

The goal of clipping mastering is to remove digital audio artifacts, such as clicks, pops, and hisses, that can degrade the sound quality of digital recordings.

Clipping mastering is also sometimes used to improve the dynamic range of digital audio recordings.

Clipping mastering is typically performed by a digital audio editor, such as Adobe Audition, on a computer.

Also, there are mastering-grade A/D converters that limit the maximum output level and dynamically compress the audio to prevent clipping.

These can be external hardware units or plugins that run inside a DAW such as Pro Tools, Logic Pro, or Cubase.

What is a clipping converter and what are its uses

what is a clipping converter

Actually, mastering-grade A/D converters that limit the maximum output level and dynamically compress the audio to prevent clipping are also called Clipping Mastering Converters. These external hardware units are used to process the digital audio before it is converted into an analog signal.

The use of a Clipping Mastering Converter can result in a more polished and professional-sounding recording.

Disclosure: This post may contain affiliate links, which means we may receive a commission if you click a link and purchase something that we recommended. Read more about Affiliate disclosure here.

It can also make the audio sound louder without causing distortion.

The main purpose of using a Clipping Mastering Converter is to avoid the digital audio artifacts, such as clicks, pops, and hisses, that can degrade the sound quality of digital recordings.

The types of clipping mastering converters

There are two types of Clipping Mastering Converters: those that limit the maximum output level and those that dynamically compress the audio.

Hard-Limiters or Brickwall Limiters

Hard-Limiters or Brickwall Limiters

The ones that limit the maximum output level are called hard-limiters. They prevent digital audio signals from exceeding a certain threshold.

This threshold is typically set at 0 dBFS (decibels full scale). Anything above this level will be clipped, or cut off.

This can result in distortion and artifacts in the audio.

However, if used correctly, hard-limiters can actually improve the sound quality of digital audio recordings by preventing clipping and distortion.

Soft-Limiters

soft limiter

The other type of Clipping Mastering Converter is the soft-limiter. Unlike hard-limiters, soft-limiters do not cut off the audio signal when it exceeds the threshold.

Instead, the audio signal is dynamically compressed.

This reduces the volume of the loudest parts of the signal, while the quieter parts remain unchanged. This can result in a more natural-sounding recording.

hard knee vs soft knee

However, if used incorrectly, soft-limiters can actually degrade the sound quality of digital audio recordings by introducing artifacts and distortion.

Why Should You Use Clipping Mastering Converters

what is audio clipping

There are many reasons why you might want to use Clipping Mastering Converters.

  • First, as I mentioned before, they can help to avoid digital audio artifacts, such as clicks, pops, and hisses, that can degrade the sound quality of digital recordings.
  • Second, they can make the audio sound louder without causing distortion.
  • This can be especially useful if you are trying to make your recordings sound more professional.
  • And third, they can help to improve the dynamic range of digital audio recordings. This can be especially useful if you are trying to make your recordings sound more natural.

Do You Need a Clipping Mastering Converter?

Now that you know what a Clipping Mastering Converter is and what it does, you might be wondering if you need one.

The answer to this question depends on a few factors.

  • First, it depends on the type of digital audio recordings you are making. If you are making music recordings, then you probably don’t need a Clipping Mastering Converter. However, if you are making voice recordings, such as for podcasts or voice-overs, then you might want to consider using one.
  • Second, it depends on the quality of your digital audio recordings. If you are making high-quality recordings, then you probably don’t need a Clipping Mastering Converter. However, if you are making low-quality recordings, then you might want to consider using one.
  • And third, it depends on your personal preference. Some people prefer the sound of digital audio recordings that have been processed with a Clipping Mastering Converter.

Others prefer the sound of digital audio recordings that have not been processed with a Clipping Mastering Converter.

It really comes down to personal preference.

How to install and use the clipping mastering converter

If you’ve decided that you want to use a Clipping Mastering Converter, then the next step is to learn how to install and use one.

Well, as you know clipping converters come in hardware and software versions. You have to decide which one you would go with.

Hardware Clipping Converters

If you have a hardware clipping converter, you need to connect it to your computer. This is typically done via a USB cable.

Once the hardware clipping converter is connected to your computer, you need to install the software that comes with it.

This software is typically called a plug-in.

Once the plug-in is installed, you need to activate it. This is typically done by opening the plug-in in your DAW (Digital Audio Workstation).

Once the plug-in is activated, you can start using it to process your digital audio recordings.

Software Clipping Converter

software clipping converter

If you’ve decided to go with a software clipping converter, then you don’t need to connect it to your computer.

You can simply install it on your computer.

Once the software clipping converter is installed on your computer, you need to activate it. This is typically done by opening the plug-in in your DAW (Digital Audio Workstation).

Best Hardware Clipping Mastering Converters

Now that you know what a Clipping Mastering Converter is and how to use one, you might be wondering which one you should use.

There is a lot of different Clipping Mastering Converters on the market.

Some are better than others.

And some are more expensive than others.

Here are 2 of the best Clipping Mastering Converters on the market:

Burl B2 Bomber ADC

Burl B2 Bomber ADC

The Burl B2 Bomber ADC is a high-quality, professional-grade Clipping Mastering Converter.

It’s designed for use in recording studios and costs around $2600.

The Burl B2 Bomber ADC is a great choice for anyone who wants to get the most professional-sounding results from their digital audio recordings. It’s designed to deliver high-quality sound without any distortion or clipping. And it’s perfect for use in recording studios.

If you’re looking for a top-of-the-line Clipping Mastering Converter, the Burl B2 Bomber ADC is definitely worth considering.

Dangerous Convert AD +

Dangerous Convert AD +

The Dangerous Convert AD+ is priced at around $3000 and is designed for use in recording studios.

The Dangerous Convert AD+ is a great option for those seeking high-quality sound without breaking the bank. It produces great sound without distortion or clipping. And it’s perfect for use in recording studios.

If you’re on a budget but still want a high-quality Clipping Mastering Converter, the Dangerous Convert AD+ is definitely worth considering.

Troubleshooting tips for clipping mastering converters

If you’re having trouble getting your Clipping Mastering Converter to work properly, here are a few troubleshooting tips:

If you’re having trouble getting your clipping converter to work properly, here are a few troubleshooting tips:

  1. Make sure the software that comes with your converter is installed and activated.
  2. Make sure the converter is connected to your computer correctly.
  3. Make sure the plug-in for your converter is activated in your DAW.
  4. If you’re using a hardware clipping converter, make sure it’s plugged into a USB port on your computer.
  5. If you’re using a software clipping converter, make sure it’s activated.
  6. If you’re still having trouble, try restarting your computer.
  7. If the problem persists, please consult customer support for assistance.

Conclusion

Now that you know what a Clipping Mastering Converter is and how to use one, you’re well on your way to getting the best possible sound from your digital audio recordings.

Just remember to troubleshoot if you run into any problems and always consult customer support if you’re still having trouble.

With a little bit of effort, you’ll be able to get the perfect sound from your Clipping Mastering Converter in no time.

Read also,

Gautam Roy is a recording engineer and a blogger from India. He loves music, writing, and travelling. He is also an active investor and a successful entrepreneur.

You Might Also Like:

Leave a Comment